• Windrow Compost Turning Machine
  • Windrow Compost Turning Machine
  • Windrow Compost Turning Machine

Windrow Compost Turning Machine

This compost machine is a new product exclusively owned by our company in the market. The composting turnover equipment fills the market gap of large wheel compost equipment at the scene.
 
Model: WF-FD 2300/WF-FD 3000      
 
Motor Power: 6-18/6-18
Share With:

Contact us

Details
Video
Parameters
Inquiry
Related Products
Details
INTRODUCTION
This compost turning machine is a new product exclusively owned by our company in the market. The composting turnover equipment fills the market gap of large wheel compost equipment at the scene. Without steering wheel, the driver only needs to control two bars, turning it to the left or right, and braking about 180 degrees. Hydraulic balance of steering wheel. The height of the mechanical shaft of the compost can be automatically lifted and lifted. According to the moisture content of the material, the fertilizer pile can rotate at high speed or at high speed.
The compost turning machine adopts soft start steering clutch (domestic similar products are used for iron hard clutch, causing serious damage to chains, bearings and shafts). The hydraulic push plate is equipped with no manual time to stack the raw materials. The drum type hydraulic lifting can greatly save space, time, diesel and manpower, and shorten the fermentation cycle.

FEATURES
1. The machine can be set the running speed of the wheel and turning axis according to the nature of the material,and get the right yield and quality.
2. The power is vertical water-cooled diesel engine with sufficient power,high efficiency and low fuel consumption.
3. The turning direction is in the direction of the pull bar,and the the turning is flexible,small area and the convenient operation.
4. Using electric button switch,joystick operation,flexible and simple.
5. According to the customer's requst,the distance between the axis and the ground can be adjusted by hydraulic pressure to prevent the turning of the trning shaft.
 
 
Video
Parameters
Model WF-FD 2300 WF-FD 2600 WF-FD 2800 WF-FD 3000
Width(mm) 2300 2600 2800 3000
Height(mm) 800-1000 1000-1200 1000-1300 1000-1300
Stack spacing(m) 1.0-1.2 1.0-1.2 1.0-1.2 1.0-1.2
Max particle size(mm) 250 250 250 250
Power R4102 turbocharged 75 diesel engine R4108 turbocharged 116 diesel engine R4110 turbocharged 123 diesel engine R6105 turbocharged 136 diesel engine
Rated power speed(r/min) 2200 2200 2200 2200
Working speed(m/min) 6-18 6-18 6-18 6-18
Driving speed(m/min) 50 50 50 50
Processing capacity(m³/h) 400-600 600-800 800-1000 1000-1200
Overall size(m) 3.5×2.65×2.8 3.9×2.65×3.2 4.1×2.65×3.2 4.3×2.65×3.2
Inquiry
Note:We promise that the personal information(name, telephone number, email address )you leaved will get the protection, and will never used for other methods. For details, please see the privacy policy.
Company name:
* Email:
* Phone:
Address:
* Content: