E-mail : [email protected]
Industry Info
2023/04/25
1. Lack of lubrication. Due to the long running time of the gears, the gears have not been stopped for lubrication in time, so the gears rub against each other. It is an iron fitting, which will inevitably produce sound.
2. There may be a problem with the bearing of a certain part of the granulator, which makes the machine work abnormally, the working current fluctuates, and the working current is too high.
3. If the steel frame structure and tail of the granulator are not installed firmly, the vibration generated during the working process will also shake, resulting in excessive noise.
4. If the feed is too fast, the equipment cannot bear it, the performance will be reduced, and there may be noise
5. The coupling is unbalanced in correction, there is a deviation in height and height, and the granulator has vibration.
6. If there are sundries in the granulation bin, or there are relatively hard impurities in the raw materials entering the granulator, not only will vibration occur, but also failures will easily occur, thus damaging the machine. Therefore, the raw materials should be mixed dry and wet as much as possible, stirred evenly, crushed and then granulated. Limit the fineness and moisture of raw materials.